Reply to thread

Message

<blockquote data-quote="colinwahl1" data-source="post: 6318977" data-attributes="member: 614753">Hey guysI have a little upgraded sound system in my new trailblazer. Threw some type r 6 1/2&quot; components in the front, threw some type r 6 1/2&quot;s in the back, ran all new knukonceptz 14 gauge speaker wire to everything as well as set up a JL 500 watt 4 channel in the back to accompany a 500/1 driving a type r 12. I just upgraded from an Alpine 9886 to an eclipse AVN52D for the bluetooth, dvd and nav features. I did run 2 4&quot; speakers in my deck so I could hear the nav and phone calls as the unit does not use the RCAs for this.All was find and dandy and worked fine for the past two weeks until I decided to set up the ESN. I setup the ESN and when I entered the ESN mode it then said turning audio off while in setup or something like that.. well that was fine and dandy, only the audio never came back on when i exited esn mode. I was like OK let&#039;s reverse this process and canceled the ESN thinking the sound would come back on, yet it hasnt.The only volume I receive is from radio when its fully at 80 and even then it is but a mere fuzzy noise. Its as if the radio has muted its rca outs. I reset the bugger like 10 times for 10-15 minute intervals and even left my battery unplugged overnight. It resets everything but this. I definately know its not the amp as well as it worked til i entered this mode. I also undid the remote and put it back in while the unit was playing to see if maybe I simply had to turn the amp on and off...Any help would be great or any knowledge of how to reset this would be awesome as I am stuck with watching my GPS location with no sound from anything on my route home until I get this fixed.</blockquote>

[QUOTE="colinwahl1, post: 6318977, member: 614753"] Hey guys I have a little upgraded sound system in my new trailblazer. Threw some type r 6 1/2" components in the front, threw some type r 6 1/2"s in the back, ran all new knukonceptz 14 gauge speaker wire to everything as well as set up a JL 500 watt 4 channel in the back to accompany a 500/1 driving a type r 12. I just upgraded from an Alpine 9886 to an eclipse AVN52D for the bluetooth, dvd and nav features. I did run 2 4" speakers in my deck so I could hear the nav and phone calls as the unit does not use the RCAs for this. All was find and dandy and worked fine for the past two weeks until I decided to set up the ESN. I setup the ESN and when I entered the ESN mode it then said turning audio off while in setup or something like that.. well that was fine and dandy, only the audio never came back on when i exited esn mode. I was like OK let's reverse this process and canceled the ESN thinking the sound would come back on, yet it hasnt. The only volume I receive is from radio when its fully at 80 and even then it is but a mere fuzzy noise. Its as if the radio has muted its rca outs. I reset the bugger like 10 times for 10-15 minute intervals and even left my battery unplugged overnight. It resets everything but this. I definately know its not the amp as well as it worked til i entered this mode. I also undid the remote and put it back in while the unit was playing to see if maybe I simply had to turn the amp on and off... Any help would be great or any knowledge of how to reset this would be awesome as I am stuck with watching my GPS location with no sound from anything on my route home until I get this fixed. [/QUOTE]

Verification