Reply to thread

Message: <blockquote data-quote="SlugButter" data-source="post: 8827674" data-attributes="member: 678073"><p>53 HZ is a very high tuning frequency for a music setup. 12.75 sq. Inches of port area would be fine for a slot port, but with a round port it will get too long to fit into the box without bending the port or letting it stick out of the box.. Round ports do not require the same amount of port area as a slot port. There is less surface area in the inside of a round port than a slot port for the air to interact with.</p></blockquote><p></p>

Top