Reply to thread

Message

<blockquote data-quote="73dartcustom" data-source="post: 923708" data-attributes="member: 557213">Hello,ok here it is.this is what I have;-2 rockford fosgate 6x9&#039;s-lanzar vibe435 1600watt 4/2 channel amp-Sony cdx-ca810x head unit-scosche amp kit-2 ma audio HK120XC subwoofers in boxThe box came with the subs and i need to make one to custom fit my trunkI need to know should i go ported or non-ported.Also i was wondering about the possibility of a cap.I need to know what kind of sound deadeners are cheap and work pretty good.Also would i be better off facing my subs toward the inside my car rather than facing them towards the trunk.Or could i just put a big port on the back of the box pointing toward my interior.I have a 1973 dodge dart custom so I have ample room.If you have ANY reccomendations whatsoever please tell me. Because I am very new to this and I don&#039;t know how to make these sound best.Also what kind of material do you reccomend that I make my box out of and how thick.Thanks,Jason BSUB SPECS• 600W Rms• 1200W Max• Dual 4-Ohm Voice Coils• 240 Oz. Double Stacked Magnets• Mounting Depth: 6.5”• Mounting Diameter: 11.2”• Optimum Vented Box: 2.0 Cu/FtRound Port Diameter: 4” x 8”Square Port Area: 3” x 6” x 12.75”• Optimum Sealed Box: 1.0 Cu/Ft• Tuning @ 40Hz</blockquote>

[QUOTE="73dartcustom, post: 923708, member: 557213"] Hello, ok here it is. this is what I have; -2 rockford fosgate 6x9's -lanzar vibe435 1600watt 4/2 channel amp -Sony cdx-ca810x head unit -scosche amp kit -2 ma audio HK120XC subwoofers in box The box came with the subs and i need to make one to custom fit my trunk I need to know should i go ported or non-ported.Also i was wondering about the possibility of a cap.I need to know what kind of sound deadeners are cheap and work pretty good.Also would i be better off facing my subs toward the inside my car rather than facing them towards the trunk.Or could i just put a big port on the back of the box pointing toward my interior.I have a 1973 dodge dart custom so I have ample room.If you have ANY reccomendations whatsoever please tell me. Because I am very new to this and I don't know how to make these sound best.Also what kind of material do you reccomend that I make my box out of and how thick. Thanks, Jason B SUB SPECS • 600W Rms • 1200W Max • Dual 4-Ohm Voice Coils • 240 Oz. Double Stacked Magnets • Mounting Depth: 6.5” • Mounting Diameter: 11.2” • Optimum Vented Box: 2.0 Cu/Ft Round Port Diameter: 4” x 8” Square Port Area: 3” x 6” x 12.75” • Optimum Sealed Box: 1.0 Cu/Ft • Tuning @ 40Hz [/QUOTE]

Verification