Reply to thread

Message

<blockquote data-quote="SAVAGE SOUND" data-source="post: 20141" data-attributes="member: 541831">all i can say is bolt your schiznit down.&nbsp; if your box is thick enough i found metal &quot;L&quot; brackets hidden under the carpet work well. you may want the put some sealant around the holes u drill just to make sure no there are no air leaks. for the amps, i took off the back of my back seats and mounted them directly to the metal backing of the seat. then cut a hole in the fabric to let the amp through yet hide all the wires.be careful if this is the aproach u take.&nbsp; when cutting the seat back make sure u allow space to get around the terminals on both sides, and not to over cut and show the metal under the fabric.&nbsp;&nbsp; if folks are still eye&#039;in your stuff take the pit for a walk, park your car by the dog house and dont feed him till morning. (jk)&nbsp; //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.giftak&#039;er easy</blockquote>

[QUOTE="SAVAGE SOUND, post: 20141, member: 541831"] all i can say is bolt your schiznit down. if your box is thick enough i found metal "L" brackets hidden under the carpet work well. you may want the put some sealant around the holes u drill just to make sure no there are no air leaks. for the amps, i took off the back of my back seats and mounted them directly to the metal backing of the seat. then cut a hole in the fabric to let the amp through yet hide all the wires.be careful if this is the aproach u take. when cutting the seat back make sure u allow space to get around the terminals on both sides, and not to over cut and show the metal under the fabric. if folks are still eye'in your stuff take the pit for a walk, park your car by the dog house and dont feed him till morning. (jk) [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] tak'er easy [/QUOTE]

Verification