Reply to thread

Message: <blockquote data-quote="sundownz" data-source="post: 6198717" data-attributes="member: 549523">Little FYI -- I tracked down most of the past failures to vibration / poor mounting... so be sure to mount them well and not to your box or just sliding around on the floor.I tried to kill one on my test bench with clipping and couldn't do it... I put in bigger fuses and ran it wide open until the case was nearly 160 degrees. Spent about an hour or so playing sine waves through it with all knobs wide open. The level I was playing it at would pop the 150-amp factory fusing.Don't do that to your amp by the way.The upcoming v.2 model will improve on anything we have found to improve so far //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif I'll have pics available to the public soon. We moved it to a higher quality double sided board and an, IMO, superior layout.</blockquote>

Top