Reply to thread

Message: <blockquote data-quote="menikmati" data-source="post: 2176720" data-attributes="member: 569512"><p>so today i reset my gains using test tones and a multimeter. i noticed that with different attentuated tones, the lower it is, (-3 db, -6db would be "lower"), the less voltage you get meaning you turn your gain up a tad bit more. also for the frequencies, i tried setting it at 50hz to 38.xx, and then when i played a 30hz tone it went to 60.xx. so with all these variables, how would calculating the voltage needed for a certain amount of RMS wattage even work? the voltage changes with different attenuations and different frequencies.</p></blockquote><p></p>

Top