Reply to thread

Message: <blockquote data-quote="East" data-source="post: 8100667" data-attributes="member: 644796">So I was cruising around one day amplifier shut off not protect I mean shut off completely... I turn the volume down kicks back on did this a few times off and on then ran fine for a long time. Well today it started doing it again so I'm like **** this got out amplifier was off no lights period, checked the ground it was solid hasnt moved since 3 systems ago. So I go upfront and the wire from the battery to the fuse block is really hot and smelly so I'm wondering why this would happen? It's 0 gauge and a 300a fuse block. I recently had it so hot the wire burnt and i had to cut back some of the wire to use it. So my question is why would it do this? It's just a Crescendo 2k with no clipping my voltage is always 13-14.4v and I only play while driving @ 1.8-2k rpms.Do I need new wire/fuse block or what?</blockquote>

Top