Reply to thread

Message: <blockquote data-quote="taylormiller" data-source="post: 8177101" data-attributes="member: 658165"><p>I have tried using the DMM but right now the problems Im having is how much voltage I need to set it too. How many ohms is my amp/sub running and can it be changed? The sub says dual voice 4ohm and the amps shows 1400Watts x1 channel @ 4ohms. Is it set right? And if the rms is 750 and peak is 1500, should i run it at 750, 1500, or in the middle? So it would be (Ohms x Watts = Voltage), so would I put 1,2, or 4 ohms in the equation? And for wattage am I putting the rms or peak of the sub or the max wattage of the amp?</p></blockquote><p></p>

Top