Reply to thread

Message

<blockquote data-quote="petelechem" data-source="post: 7200150" data-attributes="member: 630092">Hi All,I ordered a Sub+Amp+Box package online and received the following parts.12 inch sealed box with 2 connectors (+ and -)12 inch DVC sub&nbsp; Audiobahn AW1251T (Dual 4ohm sub)Juice JA590 AmpMy question is regarding wiring of the sub to the amp.From what I understand, if I were to wire the Sub in parrallel, the Amp would see a 2ohm load. If I wire in series, it would see an 8ohm load.the manual for the amp states that it can do 2-4ohm per channel in stereo but only 4ohm in bridged mode.&nbsp; The guy from the website told me the amp should do 8ohm in bridged mode which would allow me to wire the sub in series.Just wanted to check this sounded correct as the manual does not mention the capability to run in bridged mode at 8ohm.thanks in advancePeter</blockquote>

[QUOTE="petelechem, post: 7200150, member: 630092"] Hi All, I ordered a Sub+Amp+Box package online and received the following parts. 12 inch sealed box with 2 connectors (+ and -) 12 inch DVC sub Audiobahn AW1251T (Dual 4ohm sub) Juice JA590 Amp My question is regarding wiring of the sub to the amp. From what I understand, if I were to wire the Sub in parrallel, the Amp would see a 2ohm load. If I wire in series, it would see an 8ohm load. the manual for the amp states that it can do 2-4ohm per channel in stereo but only 4ohm in bridged mode. The guy from the website told me the amp should do 8ohm in bridged mode which would allow me to wire the sub in series. Just wanted to check this sounded correct as the manual does not mention the capability to run in bridged mode at 8ohm. thanks in advance Peter [/QUOTE]

Verification