Reply to thread

Message: <blockquote data-quote="akheathen" data-source="post: 7225253" data-attributes="member: 629234"><p>Wait, so the fronts are 2ohm?.... That alone could send the Sony into protect seeing low impedance/ voltage drop, I would imagine ......  I would start with turning bass down on the hi, Nd adjusting the amp gains ...... I would also venture to say 2ohm mids have low sensitivity...... It would help to take voltage readings off the 4 channels.  If there is wiring problem, I would put money on it not being even through all  channels, and definatly show by measuring the outputs</p></blockquote><p></p>

Top