Reply to thread

Message: <blockquote data-quote="NASTY08IMPALA" data-source="post: 8167598" data-attributes="member: 644081"><p>Well running a sa @2 ohms on that amp and running a zv3 @1 should be quite a diffeence ..and full out put at 2 ohms isnt going to be same gain level as 1 ohm ..u need to at least set with a dmm ..need to match the output voltage on the headunit to the amp..theres no such thing as 1/4 1/2 or 3/4. way up ..its not a volume knob.also make sure ur lpf is around 80 and ssf is about 24-25...make sure sub volume is all the way up when doing this ..what kind of box is it in ? same as the sa?</p></blockquote><p></p>

Top