Reply to thread

Message

<blockquote data-quote="reiting" data-source="post: 8122247" data-attributes="member: 655526">First of all hi everybody !I have had my amp and subwoofer for like 3 weeks now and still havent got it working yet //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Both of them are brand new and I have been hassling with them so much and now I am out of ideas and hope u guys can help me out.I have measured the connections with a multimeter and got the following results : 12V from battery, 12V from REM. Ground should be ok, nicely sanded and tightly connected to chassis. Measured ground also and it showed -12V ( multimeter one end to amps + terminal and another end to ground terminal ). RCA has been a problem, from headunit I couldnt get any measurements through RCA cables ( subwoofer output was turned on and went through all settings ). So I got a high low adapter, connected it correctly and I finally got a signal through RCA cable but still no output. I have tried to use the 60hz testtone and then turn the gain control on the amp and so on but still no output :S. Amp and subwoofer should also be connected correctly, - to - and + to +. I hope I wrote all the information here. Also sorry for my poor english, hopefully u will understand it. Also amps power light is on ( should mean the it runs correctly ) and protect light is off.One question also. Will I get reading from the output terminals with multimeter even when the amp isnt connected to sub ?</blockquote>

[QUOTE="reiting, post: 8122247, member: 655526"] First of all hi everybody ! I have had my amp and subwoofer for like 3 weeks now and still havent got it working yet [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] Both of them are brand new and I have been hassling with them so much and now I am out of ideas and hope u guys can help me out. I have measured the connections with a multimeter and got the following results : 12V from battery, 12V from REM. Ground should be ok, nicely sanded and tightly connected to chassis. Measured ground also and it showed -12V ( multimeter one end to amps + terminal and another end to ground terminal ). RCA has been a problem, from headunit I couldnt get any measurements through RCA cables ( subwoofer output was turned on and went through all settings ). So I got a high low adapter, connected it correctly and I finally got a signal through RCA cable but still no output. I have tried to use the 60hz testtone and then turn the gain control on the amp and so on but still no output :S. Amp and subwoofer should also be connected correctly, - to - and + to +. I hope I wrote all the information here. Also sorry for my poor english, hopefully u will understand it. Also amps power light is on ( should mean the it runs correctly ) and protect light is off. One question also. Will I get reading from the output terminals with multimeter even when the amp isnt connected to sub ? [/QUOTE]

Verification