Reply to thread

Message

<blockquote data-quote="AccordLX" data-source="post: 6151802" data-attributes="member: 609938">I recently bought an orion hcca-d5000 and surprisingly I found out that it has 2 battery/ground/remote terminals! this is new to me LoL! now, I know that I have to connect both terminals so I need to bridge my power wires? or need a distribution block for it?I found this one on ebay and I need ya&#039;ll opinions...<a href="http://cgi.ebay.com/SDB034PT-Stinger-Hpm-0-to-4-gauge-distribution-block_W0QQitemZ270368308029QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ef334fb3d&amp;amp;_trksid=p3286.c0.m14&amp;amp;_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1205%7C293%3A1%7C294%3A50" target="_blank">http://cgi.ebay.com/SDB034PT-Stinger-Hpm-0-to-4-gauge-distribution-block_W0QQitemZ270368308029QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ef334fb3d&amp;amp;_trksid=p3286.c0.m14&amp;amp;_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50</a>I need to sets right? one for the power and the other one will be for the ground...also, a little bit info... Im running 0 gauge wire from the battery to the back of my accord, and also Im running a kicker zx350.4 for my front and rear... so I need at least 3 terminal distribution block....Any distribution block ya&#039;ll be recommending me to buy instead the one that I found on ebay will be greatly appreciated....</blockquote>

[QUOTE="AccordLX, post: 6151802, member: 609938"] I recently bought an orion hcca-d5000 and surprisingly I found out that it has 2 battery/ground/remote terminals! this is new to me LoL! now, I know that I have to connect both terminals so I need to bridge my power wires? or need a distribution block for it? I found this one on ebay and I need ya'll opinions... [URL="http://cgi.ebay.com/SDB034PT-Stinger-Hpm-0-to-4-gauge-distribution-block_W0QQitemZ270368308029QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ef334fb3d&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1205%7C293%3A1%7C294%3A50"]http://cgi.ebay.com/SDB034PT-Stinger-Hpm-0-to-4-gauge-distribution-block_W0QQitemZ270368308029QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ef334fb3d&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50[/URL] I need to sets right? one for the power and the other one will be for the ground... also, a little bit info... Im running 0 gauge wire from the battery to the back of my accord, and also Im running a kicker zx350.4 for my front and rear... so I need at least 3 terminal distribution block.... Any distribution block ya'll be recommending me to buy instead the one that I found on ebay will be greatly appreciated.... [/QUOTE]

Verification