Reply to thread

Message

<blockquote data-quote="fastfive09" data-source="post: 5994756" data-attributes="member: 596217">I have a cadence 4 channel TXA-300.4 which is currently in protect mode.It is hooked up to my alpine type e components right now.I recently took out my box and amp on to make a few cosmetic tweaks. In the mean time i wired my harness to factory mode with highs running off the HU. I was having problems with it cutting out like that, i checked my twist and tape connections over and over and they seemed perfect but the music kept cutting out and not coming back.I then decided to grab my amp and hook it back up to the highs by twisting and taping the speaker wires coming from the amp to the HU harness. Now when i turn on my headunit i get music for about three seconds then the music stops. I can turn it off and on and get three seconds out of it each time it is reset. The amp has the protect light on, all my fuses are fine and all wires behind the HU are taped off. . I have checked my ground and power wire and they seem connected properly. Any suggestions on wtf is wrong?</blockquote>

[QUOTE="fastfive09, post: 5994756, member: 596217"] I have a cadence 4 channel TXA-300.4 which is currently in protect mode. It is hooked up to my alpine type e components right now. I recently took out my box and amp on to make a few cosmetic tweaks. In the mean time i wired my harness to factory mode with highs running off the HU. I was having problems with it cutting out like that, i checked my twist and tape connections over and over and they seemed perfect but the music kept cutting out and not coming back. I then decided to grab my amp and hook it back up to the highs by twisting and taping the speaker wires coming from the amp to the HU harness. Now when i turn on my headunit i get music for about three seconds then the music stops. I can turn it off and on and get three seconds out of it each time it is reset. The amp has the protect light on, all my fuses are fine and all wires behind the HU are taped off. . I have checked my ground and power wire and they seem connected properly. Any suggestions on wtf is wrong? [/QUOTE]

Verification