Reply to thread

Message

<blockquote data-quote="REDz28" data-source="post: 7770088" data-attributes="member: 640869">My crescendo 1000c4 isn&#039;t working. Here&#039;s exactly what happensamp is hooked up to 4 gauge wiring hit that was perviously wired to my Hinoincs Brutus, no problems ever came up with the amp not working. So to test my 1000c4 toady I hooked up my super tweets plugged my RCAs in to all 4 channels with a Y splitter and turned my car on, radio clicks on, but the amp doesn&#039;t play. I looked in the back and tried again, when my headunit click on my amp turns on right away but the normal blue power light doesn&#039;t come on instead the protection mode light turns on for about 10 seconds them goes off but the power light never turns on at all. Went through the troubleshooting steps with RCAs out and speaker wire out same thing. Checked my 30amp fuses there&#039;s 3 and they all look good. My connections to my battery up front are good to. I don&#039;t know what&#039;s upCould maybe the 4 gauge be to big? I mean I highly doubt that.Let me know I really hope its something simply and I&#039;m just overlooking it.</blockquote>

[QUOTE="REDz28, post: 7770088, member: 640869"] My crescendo 1000c4 isn't working. Here's exactly what happens amp is hooked up to 4 gauge wiring hit that was perviously wired to my Hinoincs Brutus, no problems ever came up with the amp not working. So to test my 1000c4 toady I hooked up my super tweets plugged my RCAs in to all 4 channels with a Y splitter and turned my car on, radio clicks on, but the amp doesn't play. I looked in the back and tried again, when my headunit click on my amp turns on right away but the normal blue power light doesn't come on instead the protection mode light turns on for about 10 seconds them goes off but the power light never turns on at all. Went through the troubleshooting steps with RCAs out and speaker wire out same thing. Checked my 30amp fuses there's 3 and they all look good. My connections to my battery up front are good to. I don't know what's up Could maybe the 4 gauge be to big? I mean I highly doubt that. Let me know I really hope its something simply and I'm just overlooking it. [/QUOTE]

Verification