Reply to thread

Message

<blockquote data-quote="Alpineforever" data-source="post: 4202407" data-attributes="member: 585728">This amp is prolly good for 500 watts at 1 ohm. If you get this one get the DVC 2 ohm version<a href="http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=4209" target="_blank">http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=4209</a>This amp will do 500 at 2 ohms. So you&#039;ll need the DVC 4 ohm with this amp<a href="http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=6249" target="_blank">http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=6249</a>This&#039;ll do 600 at 1 ohm. so once again DVC 2 ohm sub with this one<a href="http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=6101" target="_blank">http://www.woofersetc.com/index.cfm?fuseaction=product.display&amp;amp;Product_ID=6101</a>If you need help figuring out how to wire your DVC sub to see the right impedance (ohm) load, use this guide<a href="http://www.rockfordfosgate.com/rftech/woofer_wizard.asp" target="_blank">http://www.rockfordfosgate.com/rftech/woofer_wizard.asp</a>Don&#039;t worry about sending these subs more than RMS rating of 500, they can take it. Just make sure you don&#039;t clip the signal coming from your amp and you&#039;ll have no problems.I have no experience with the profile amp, but it&#039;ll probably do close to rated, hopefully some1 can chime in</blockquote>

[QUOTE="Alpineforever, post: 4202407, member: 585728"] This amp is prolly good for 500 watts at 1 ohm. If you get this one get the DVC 2 ohm version [URL="http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4209"]http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4209[/URL] This amp will do 500 at 2 ohms. So you'll need the DVC 4 ohm with this amp [URL="http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6249"]http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6249[/URL] This'll do 600 at 1 ohm. so once again DVC 2 ohm sub with this one [URL="http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6101"]http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6101[/URL] If you need help figuring out how to wire your DVC sub to see the right impedance (ohm) load, use this guide [URL="http://www.rockfordfosgate.com/rftech/woofer_wizard.asp"]http://www.rockfordfosgate.com/rftech/woofer_wizard.asp[/URL] Don't worry about sending these subs more than RMS rating of 500, they can take it. Just make sure you don't clip the signal coming from your amp and you'll have no problems. I have no experience with the profile amp, but it'll probably do close to rated, hopefully some1 can chime in [/QUOTE]

Verification