Reply to thread

Message: <blockquote data-quote="mdillon" data-source="post: 4356714" data-attributes="member: 582463">amp is mbquart pab1200.1 yesterday it started going into protect at about half volume. after i got home i pulled the beauty panels off to check my crossover levels. the levels vibrated from 1/2 on the output knob to full. the amp will power back on if deck is power cycled and the amp will play until its turned up too loud.subs are 2-12's dual 4 paralleled al the way down to 1 ohm. my dmm shows them at 1.2 ohm at the amp. so i assume they are still bueno.so is my problem the amp? and if so im assuming i popped some outputs.any help will be appreciated</blockquote>

Top