Reply to thread

Message: <blockquote data-quote="vinnie_febs" data-source="post: 1823875" data-attributes="member: 553428"><p>Another question and I apologize for the ignorance, but I've noticed that theres two speaker inputs on all mono amps, and I'm only using one sub. Is the RMS per speaker output all total.  For example the mtx 420d is 300w rms X 1 @ 2ohms (so thats 300 per speaker output or 150 for each with a total of 300) Or do I have to bridge it in order to make the amp work at 2 ohms with the total of 300, if so is it like this with all mono amps (at least most of them) each sub output is 4 ohms; and bridged is 2 ohms.</p></blockquote><p></p>

Top