Reply to thread

Message: <blockquote data-quote="CELLERBR" data-source="post: 339363" data-attributes="member: 549917">the sub doesnt handle the ohm load the amp does! And chance are if you have it wired to 4ohms with that type R dvc then you will not be able to wire to 2 ohms b/c you sub is dual 2 ohm so you could either wire to 1 ohm (which i would not reccomend as it would kill the amp eventually) or 4 ohms (which is what it should be at)&gt; I think you meant to ask if the sub could handle the 600wrms....If so then yes it could handle it if done properly and you watch your gains on your amp! But unless you have a dual 4 ohm voice coil sub you cant take it to 2 ohms-Ian</blockquote>

Top