Reply to thread

Message

<blockquote data-quote="yacob.naif" data-source="post: 1711490" data-attributes="member: 565696"><a href="http://www.hookedontronics.com/show_product_details.jsp?cid=19053" target="_blank">http://www.hookedontronics.com/show_product_details.jsp?cid=19053</a>That&#039;ll work nicely.&nbsp; It&#039;s 40w x 4 @ 4 ohms, so it&#039;ll play nice with the alpines you put in.&nbsp; It&#039;s also 2 ohm stable, so you could run the rear speakers and the extra set of speakers in the car off the same channels, i would recommend leaving the left-over factory speakers disconnected, tho.&nbsp; They&#039;ll probably get way way louder off the same amount of power, and if they&#039;re sharing a channel, there&#039;ll be no way to equalize them.&nbsp; The other option would be to replace them with alpines as well, and then run them off the same channel as the 6x9&#039;s, so they&#039;d all be getting 25 rms.&nbsp; A third option would be hooking your front alpines to the same channel as your rear alpines, and then running those factory speakers off of the rear channels, which would let you equalize the loudness of all 3 pairs, but you&#039;ll lose the ability to fade from front to back.Good luck.BTW, amplifiers are amplifiers, there&#039;s no bass vs sq when choosing an amp.&nbsp; You base it off it&#039;s rated power, reliability, and crossover functions that you want.&nbsp; And of course, a well known brand name only sweetens the deal.</blockquote>

[QUOTE="yacob.naif, post: 1711490, member: 565696"] [URL="http://www.hookedontronics.com/show_product_details.jsp?cid=19053"]http://www.hookedontronics.com/show_product_details.jsp?cid=19053[/URL] That'll work nicely. It's 40w x 4 @ 4 ohms, so it'll play nice with the alpines you put in. It's also 2 ohm stable, so you could run the rear speakers and the extra set of speakers in the car off the same channels, i would recommend leaving the left-over factory speakers disconnected, tho. They'll probably get way way louder off the same amount of power, and if they're sharing a channel, there'll be no way to equalize them. The other option would be to replace them with alpines as well, and then run them off the same channel as the 6x9's, so they'd all be getting 25 rms. A third option would be hooking your front alpines to the same channel as your rear alpines, and then running those factory speakers off of the rear channels, which would let you equalize the loudness of all 3 pairs, but you'll lose the ability to fade from front to back. Good luck. BTW, amplifiers are amplifiers, there's no bass vs sq when choosing an amp. You base it off it's rated power, reliability, and crossover functions that you want. And of course, a well known brand name only sweetens the deal. [/QUOTE]

Verification