Reply to thread

Message

<blockquote data-quote="my2006c6" data-source="post: 8909516" data-attributes="member: 661724">Just updated sub and sealed box.&nbsp; Original sub was a Older Low profile Pioneer (ts-sw3001s4 ) if i remember correctly, which i had for x amount of years, and in a ebay box of .80 cu air space... She just didnt give me enough .So i bought a new box ,<h3>Flex Series Down Fire Subwoofer Box and i put a , IMAGE DYNAMICS IDQ12 V.4 Sub. -- Box seems&nbsp; very well built and 1 cu ft air space.&nbsp;&nbsp; And wired for 2 ohms into my DC AUDIO 1100.1 which should be 800 watt @ 2 ohm.&nbsp; Amp is rated down to 1 ohm.</h3>I get confused on using the bass knob, as i set my amp gain just before clipping using test tone and my HU volume at 28 (max volume is 35) .&nbsp; Wouldnt adding a knob and turning it up more send a clipped signal ??.Also my car is a 2005 Vette and when installing 4 AWG (GP brand wire ) there is only so many places to ground. Most owners use a factory ground location at what some call the B pillar. ( body) So i did the same, but i also added a 4 AWG wire off the body under the hood and ran it to the battery neg terminal .Link to the box.[URL unfurl=&quot;true&quot;]https://audiointensity.com/products/flex-series-downfire-subwoofer-box-image-dynamics[/URL]</blockquote>

[QUOTE="my2006c6, post: 8909516, member: 661724"] Just updated sub and sealed box. Original sub was a Older Low profile Pioneer (ts-sw3001s4 ) if i remember correctly, which i had for x amount of years, and in a ebay box of .80 cu air space... She just didnt give me enough . So i bought a new box , [HEADING=2]Flex Series Down Fire Subwoofer Box and i put a , IMAGE DYNAMICS IDQ12 V.4 Sub. -- Box seems very well built and 1 cu ft air space. And wired for 2 ohms into my DC AUDIO 1100.1 which should be 800 watt @ 2 ohm. Amp is rated down to 1 ohm.[/HEADING] I get confused on using the bass knob, as i set my amp gain just before clipping using test tone and my HU volume at 28 (max volume is 35) . Wouldnt adding a knob and turning it up more send a clipped signal ??. Also my car is a 2005 Vette and when installing 4 AWG (GP brand wire ) there is only so many places to ground. Most owners use a factory ground location at what some call the B pillar. ( body) So i did the same, but i also added a 4 AWG wire off the body under the hood and ran it to the battery neg terminal . Link to the box. [URL unfurl="true"]https://audiointensity.com/products/flex-series-downfire-subwoofer-box-image-dynamics[/URL] [/QUOTE]

Verification