Reply to thread

Message

<blockquote data-quote="keep_hope_alive" data-source="post: 7356434" data-attributes="member: 576029">Glad you&#039;ve done similar research so far.&nbsp; Not my pic, nor my hand //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. I don&#039;t have one anymore.&nbsp; Used to.Note that a DMM can get you the speaker negative outputs, they&#039;ll be tied together as a common ground. How many pins do you have total?&nbsp; You&#039;ll either have 8, 6, or 5 speaker output depending on how they did the common.&nbsp; Back then, it was common to have a common speaker ground for front/rear or all.&nbsp; Make sense?&nbsp; once you figure out the common, you could simply power up and use the fader and balance to narrow down the speaker positive pins.&nbsp; I understand the desire to get the speaker wire colors right the first time.&nbsp; Hopefully using industry standard wire colors.&nbsp; I will see what I can dig up.</blockquote>

[QUOTE="keep_hope_alive, post: 7356434, member: 576029"] Glad you've done similar research so far. Not my pic, nor my hand [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG]. I don't have one anymore. Used to. Note that a DMM can get you the speaker negative outputs, they'll be tied together as a common ground. How many pins do you have total? You'll either have 8, 6, or 5 speaker output depending on how they did the common. Back then, it was common to have a common speaker ground for front/rear or all. Make sense? once you figure out the common, you could simply power up and use the fader and balance to narrow down the speaker positive pins. I understand the desire to get the speaker wire colors right the first time. Hopefully using industry standard wire colors. I will see what I can dig up. [/QUOTE]

Verification