Reply to thread

Message: <blockquote data-quote="Chevyaudio" data-source="post: 2049760" data-attributes="member: 559770"><p>If you go active...you must take out the Deck and switch the X-over mode from Frnt-Rear-sub...to 3-way. Its a little switch on the bottom of the Deck. After that, it should be a little more straight forward as to where you should x-over each. But running active is not something someone should do unless they have a good understanding of the drivers they are using. And most of the time its not a good Idea to run a set of Passive Components active...simply because the x-over points in the passive crossovers are engineered for those drivers. also power handling on the individual components are rather low.</p></blockquote><p></p>

Top