Reply to thread

Message

<blockquote data-quote="praktekal" data-source="post: 7898502" data-attributes="member: 645074">Hello all,I hope I am in the right place.&nbsp; I have been a long time (well, about 6 months) lurker while I have been piecing out my stereo, but would like the advice of you kind individuals.&nbsp; I&#039;ve taken what I&#039;ve read and bought everything accordingly after hearing thoughts/suggestions from previous posters.&nbsp; Here&#039;s what I currently have so far:Car: 2011 Maxima Type-SSub: (1) AudioQue HDC312Box: ProBoxDoor Speakers: AudioQue AQ-TS65 (componants front)AudioQue AQ-MR65 (back support)Amps: Sub Amp: AudioQue AQ2200D (1 Ohm)Door Speaker Amp: AudioQue AQ-1204Wiring: Wiring Kit for Amps - IXOS-PK0 x2X-Series-Twisted-Speaker-12-Gauge (door speakers)Head Unit: Clarion CZ102Distro Block: Rockford Fosgate RFD1.htmlNow, here are my questions:1.) Do I NEED to replace my battery with an AGM battery? If so, what is the best bang for the buck? Not looking to drop over $300 and would not want to drop over $200, but can be negotiable.2.) For RCA cables, what should I get? I was going down the KNU Krystal Kables route, but not sure what kind. Look at my setup currently with the head unit/amps.3.) If I was going to upgrade the &quot;Big 3,&quot; what else would I need to get to get that done? I heard my amp kits will have extra&#039;s, so if that&#039;s the case, what would I be lacking if I could use the extra&#039;s from the kits?4.) Anything else I am lacking before I drop this off to the installer? I want to have EVERYTHING ready with no surprise costs besides labor.Thanks in advance!</blockquote>

[QUOTE="praktekal, post: 7898502, member: 645074"] Hello all, I hope I am in the right place. I have been a long time (well, about 6 months) lurker while I have been piecing out my stereo, but would like the advice of you kind individuals. I've taken what I've read and bought everything accordingly after hearing thoughts/suggestions from previous posters. Here's what I currently have so far: Car: 2011 Maxima Type-S Sub: (1) AudioQue HDC312 Box: ProBox Door Speakers: AudioQue AQ-TS65 (componants front) AudioQue AQ-MR65 (back support) Amps: Sub Amp: AudioQue AQ2200D (1 Ohm) Door Speaker Amp: AudioQue AQ-1204 Wiring: Wiring Kit for Amps - IXOS-PK0 x2 X-Series-Twisted-Speaker-12-Gauge (door speakers) Head Unit: Clarion CZ102 Distro Block: Rockford Fosgate RFD1.html Now, here are my questions: 1.) Do I NEED to replace my battery with an AGM battery? If so, what is the best bang for the buck? Not looking to drop over $300 and would not want to drop over $200, but can be negotiable. 2.) For RCA cables, what should I get? I was going down the KNU Krystal Kables route, but not sure what kind. Look at my setup currently with the head unit/amps. 3.) If I was going to upgrade the "Big 3," what else would I need to get to get that done? I heard my amp kits will have extra's, so if that's the case, what would I be lacking if I could use the extra's from the kits? 4.) Anything else I am lacking before I drop this off to the installer? I want to have EVERYTHING ready with no surprise costs besides labor. Thanks in advance! [/QUOTE]

Verification