Reply to thread

Message

<blockquote data-quote="Xprime4" data-source="post: 5543940" data-attributes="member: 596654">1. Pretty poor but i&#039;m monitoring my voltage every second when bumping. Never goes under 13v. Not bumping too long either or when i&#039;m not on the highway.2. Me, with the help of rashaad for the aeros port dimension. Everything was going well until i had to cut the top part of the box coz my lid wasn&#039;t closing... then two aeros got in the way hence the cutting of them...3. Amp set properly. ss, hpf, gain everything is set by me and i know how amp work. I&#039;ve set the gain conservatively coz i don&#039;t want to blow it.. just got the amp yesturday, did a swap with my low power amp . Now that the sub got some nice excursion, noise are just unbearable... gain set around 1/4 but 1/4 is not a science... but i&#039;m pretty sure i&#039;m not clipping it. That doesn&#039;t sound like clipping, more like if the box wasn&#039;t sealed right in corner or around port or the port themselvesi&#039;m 99% sure it&#039;s a port problem.</blockquote>

[QUOTE="Xprime4, post: 5543940, member: 596654"] 1. Pretty poor but i'm monitoring my voltage every second when bumping. Never goes under 13v. Not bumping too long either or when i'm not on the highway. 2. Me, with the help of rashaad for the aeros port dimension. Everything was going well until i had to cut the top part of the box coz my lid wasn't closing... then two aeros got in the way hence the cutting of them... 3. Amp set properly. ss, hpf, gain everything is set by me and i know how amp work. I've set the gain conservatively coz i don't want to blow it.. just got the amp yesturday, did a swap with my low power amp . Now that the sub got some nice excursion, noise are just unbearable... gain set around 1/4 but 1/4 is not a science... but i'm pretty sure i'm not clipping it. That doesn't sound like clipping, more like if the box wasn't sealed right in corner or around port or the port themselves i'm 99% sure it's a port problem. [/QUOTE]

Verification