Reply to thread

Message

<blockquote data-quote="SounDrive" data-source="post: 8446998" data-attributes="member: 653833">I&#039;ve used 3 different new style Taramps (DSP series and HD10k, the 10k is improved over the rest) so yes I do have personal experience with them.The DSP and HD10k actually have fixation rods to fix the vibration issues the old ones had, so that point is incorrect. They cannot be wired low (which I don&#039;t do anyway) but they do plenty of power. Plenty of people have clamped lots of power from them including one of my team members clamping 6k from his rising to 5 ohm dropping below 12v (same as 6k at 2.5 ohm if it were a 1 ohm version) ---------- Post added at 01:12 PM ---------- Previous post was at 01:11 PM ---------- My Brazilian amps 100% work for my application.</blockquote>

[QUOTE="SounDrive, post: 8446998, member: 653833"] I've used 3 different new style Taramps (DSP series and HD10k, the 10k is improved over the rest) so yes I do have personal experience with them. The DSP and HD10k actually have fixation rods to fix the vibration issues the old ones had, so that point is incorrect. They cannot be wired low (which I don't do anyway) but they do plenty of power. Plenty of people have clamped lots of power from them including one of my team members clamping 6k from his rising to 5 ohm dropping below 12v (same as 6k at 2.5 ohm if it were a 1 ohm version) [COLOR=Silver] [/COLOR] [COLOR=Silver][SIZE=8px]---------- Post added at 01:12 PM ---------- Previous post was at 01:11 PM ----------[/SIZE][/COLOR][SIZE=8px][/SIZE] [COLOR=Silver] [/COLOR] My Brazilian amps 100% work for my application. [/QUOTE]

Verification