Reply to thread

Message: <blockquote data-quote="sbuswell" data-source="post: 8481250" data-attributes="member: 659410"><p>I got an IDMAX 12 it'll fit in the Zenclosures box no problems too. The box is 2.0 cubic feet which is a little bigger than the recommend 1.5. I have a ton of poly fill. Should I use that to reduce the interior airspace? I plan on running the sub in parallel so I can get 1200RMS from my Kicker amp @ 2ohm. Figure I'll dial down the gain to make sure i don't over power it, but from what I've read these subs can handle more than their advertised power and do it reliably.</p></blockquote><p></p>

Top