Reply to thread

Message: <blockquote data-quote="req" data-source="post: 2902915" data-attributes="member: 555713">i would start by running my mids from about 100hz to about 4~5khz. then the tweets from 4~5khz and up.something you have sounds messed up. you need to tripple check and make sure your wires are going where they are supposed to be going and getting the signal they should be getting.sounds to me like your filters are messed up, and you may have hooked a RCA input or speaker wire to the wrong place. also check your amp(s) to make sure that the filters\boost are all set to off\flat.</blockquote>

Top