Reply to thread

Message

<blockquote data-quote="Latina33" data-source="post: 2902663" data-attributes="member: 570943">Here&#039;s my setup:Alpine CDA 7998Alpine MRD F752 5 channel 75X4 +300X1 @4ohms1 pair Crystal SSCS6 components being run ActiveMy problem is that this weekend I&#039;ve had to replace my tweeter for the 3rd time since going Active. When my system was set up to go Active, it was installed and configured by a shop that knows what they are doing, and they&#039;re also an authorized seller of both Alpine and Crystal.Since my HU was configured, I haven&#039;t messed with the crossover configurations, and I haven&#039;t adjusted any other settings, such as gain, etc.One of the guys at the shop told me that when you go Active, sometimes you have equipment (speaker) failures like I have, like my tweets repeatedly going out/needing to be replaced. Anyone else have this issue going active, or know what might be causing the problem?</blockquote>

[QUOTE="Latina33, post: 2902663, member: 570943"] Here's my setup: Alpine CDA 7998 Alpine MRD F752 5 channel 75X4 +300X1 @4ohms 1 pair Crystal SSCS6 components being run Active My problem is that this weekend I've had to replace my tweeter for the 3rd time since going Active. When my system was set up to go Active, it was installed and configured by a shop that knows what they are doing, and they're also an authorized seller of both Alpine and Crystal. Since my HU was configured, I haven't messed with the crossover configurations, and I haven't adjusted any other settings, such as gain, etc. One of the guys at the shop told me that when you go Active, sometimes you have equipment (speaker) failures like I have, like my tweets repeatedly going out/needing to be replaced. Anyone else have this issue going active, or know what might be causing the problem? [/QUOTE]

Verification