Reply to thread

Message

<blockquote data-quote="audio_phill" data-source="post: 8185852" data-attributes="member: 605512">Here&#039;s my full (pre-break in) tsp set pulled from 2 drivers they were amazingly close so I&#039;m only listing one set to not ne redundant (changed my mind looked through them and they werent as close as I remembered, but I do remember testing one so that may be the difference seen.(Possibly tested)Re&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 6.2336 ohmsFs&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp;&nbsp; 48.7109 HzZmax&nbsp; &nbsp; &nbsp;&nbsp; =&nbsp;&nbsp; 82.0397 ohmsQes&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 0.4849Qms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 5.8965Qts&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 0.4480Le&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 0.7690 mH&nbsp; (at 1 kHz)Diam&nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; 127.0000 mm&nbsp; (&nbsp; 5.0000 in&nbsp; )Sd&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =12667.6876 mm^2( 19.6350 in^2)Vas&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp;&nbsp; 10.4059 L&nbsp;&nbsp; (&nbsp; 0.3675 ft^3)BL&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 9.5928 N/AMms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp;&nbsp; 23.3867 gCms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; 456.4769 uM/NKms&nbsp; &nbsp; &nbsp; &nbsp; = 2190.6914 N/MRms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 1.2139 R mechanicalEfficiency =&nbsp; &nbsp; 0.2331 %Sensitivity=&nbsp;&nbsp; 85.6928 dB @1W/1mNew unpoweredRe&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 6.2712 ohmsFs&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp;&nbsp; 50.6312 HzZmax&nbsp; &nbsp; &nbsp;&nbsp; =&nbsp;&nbsp; 76.0666 ohmsQes&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 0.5143Qms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 5.7235Qts&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 0.4719Le&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 0.7864 mH&nbsp; (at 1 kHz)Diam&nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; 127.0000 mm&nbsp; (&nbsp; 5.0000 in&nbsp; )Sd&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =12667.6876 mm^2( 19.6350 in^2)Vas&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 9.3982 L&nbsp;&nbsp; (&nbsp; 0.3319 ft^3)BL&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; =&nbsp; &nbsp; 9.6426 N/AMms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp;&nbsp; 23.9673 gCms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; 412.2727 uM/NKms&nbsp; &nbsp; &nbsp; &nbsp; = 2425.5791 N/MRms&nbsp; &nbsp; &nbsp; &nbsp; =&nbsp; &nbsp; 1.3322 R mechanicalEfficiency =&nbsp; &nbsp; 0.2229 %Sensitivity=&nbsp;&nbsp; 85.4987 dB @1W/1m</blockquote>

[QUOTE="audio_phill, post: 8185852, member: 605512"] Here's my full (pre-break in) tsp set pulled from 2 drivers they were amazingly close so I'm only listing one set to not ne redundant (changed my mind looked through them and they werent as close as I remembered, but I do remember testing one so that may be the difference seen. (Possibly tested) Re = 6.2336 ohms Fs = 48.7109 Hz Zmax = 82.0397 ohms Qes = 0.4849 Qms = 5.8965 Qts = 0.4480 Le = 0.7690 mH (at 1 kHz) Diam = 127.0000 mm ( 5.0000 in ) Sd =12667.6876 mm^2( 19.6350 in^2) Vas = 10.4059 L ( 0.3675 ft^3) BL = 9.5928 N/A Mms = 23.3867 g Cms = 456.4769 uM/N Kms = 2190.6914 N/M Rms = 1.2139 R mechanical Efficiency = 0.2331 % Sensitivity= 85.6928 dB @1W/1m New unpowered Re = 6.2712 ohms Fs = 50.6312 Hz Zmax = 76.0666 ohms Qes = 0.5143 Qms = 5.7235 Qts = 0.4719 Le = 0.7864 mH (at 1 kHz) Diam = 127.0000 mm ( 5.0000 in ) Sd =12667.6876 mm^2( 19.6350 in^2) Vas = 9.3982 L ( 0.3319 ft^3) BL = 9.6426 N/A Mms = 23.9673 g Cms = 412.2727 uM/N Kms = 2425.5791 N/M Rms = 1.3322 R mechanical Efficiency = 0.2229 % Sensitivity= 85.4987 dB @1W/1m [/QUOTE]

Verification