Reply to thread

Message

<blockquote data-quote="Feandil" data-source="post: 1489366" data-attributes="member: 558570">this driver would max out SPL wise around 118db at 100hz or so... and that&#039;s mostly due to power handling maxing out around 200w RMSit IS rated for 125w RMS though... so keep that in mindwe have an 11mm one way shallow driver with a good 9mm one way of flat BL that is only 2.75&quot; deep.... 90db/w however but overall the SQ would be similar.... little less power handling and all that... self shielded however.... Fs is around 40hz on this driverpics of this one shortly... these are for temptation purposes only //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gifand as far as Kms Curve... with a 5.75&quot; spider it&#039;s quite possibly the most linear curve of any 6.5&quot; speaker currently available... heck it&#039;s probably the best KMS curve for any 8&quot; driver currently made....For all intents and purposes there is no KMS/BL induced distortion whatsoever until you&#039;ve pushed it well beyond 17mm one wayInductance is pretty much as low as it gets ... 0.03mh or so extension should easily be into the 11-14khz range for practical purposes</blockquote>

[QUOTE="Feandil, post: 1489366, member: 558570"] this driver would max out SPL wise around 118db at 100hz or so... and that's mostly due to power handling maxing out around 200w RMS it IS rated for 125w RMS though... so keep that in mind we have an 11mm one way shallow driver with a good 9mm one way of flat BL that is only 2.75" deep.... 90db/w however but overall the SQ would be similar.... little less power handling and all that... self shielded however.... Fs is around 40hz on this driver pics of this one shortly... these are for temptation purposes only [IMG]//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif[/IMG] and as far as Kms Curve... with a 5.75" spider it's quite possibly the most linear curve of any 6.5" speaker currently available... heck it's probably the best KMS curve for any 8" driver currently made.... For all intents and purposes there is no KMS/BL induced distortion whatsoever until you've pushed it well beyond 17mm one way Inductance is pretty much as low as it gets ... 0.03mh or so extension should easily be into the 11-14khz range for practical purposes [/QUOTE]

Verification