Reply to thread

Message: <blockquote data-quote="PaulD" data-source="post: 4425164" data-attributes="member: 589636"><p>generally speaking you will wire pwr, gnd and remote turn-on to the EQ.  Then pick a front or rear RCA output from the headunit and put that into the EQ's input, then wire the EQ's RCA output to a crossover if EQ does not have one built in.  From the crossover or EQ/crossover outputs you run the rca's to the amps.  If you choose to use the crossover in the headunit, then the EQ will only work with the amp and speakers of the output it is on.  You can actually wire in the bass expander just before the bass amp(s) if you like.</p></blockquote><p></p>

Top