Reply to thread

Message

<blockquote data-quote="KniteWulfe" data-source="post: 1807326" data-attributes="member: 568399">I am currently up in the air over a couple different setups and was wondering what everyone&#039;s input would be on these.&nbsp; I am set on using 12&#039; Kicker Comp 05CVR122 2 ohm 400W RMS speakers but the rest can be changed. So far I have only purchased one of those speakers.&nbsp; I have pretty much figured out what fits in my budget and these are my options.&nbsp; I am planning this in a 2.4 cubic foot custom enclosure for 3rd gen f-bodies.Option 1: single 05CVR122 in a ported box wired for 4 ohms powered off a Rockford Fosgate Punch P4002 bridged to 400w @ 4ohms RMS, perfectly matching power for the single speaker.Option 2: dual 05CVR122s at 2ohms in a sealed box powered by a Profile AP2000 putting out 480W per channel at 2 ohms.Option 3 would be single sealed 05CVR122 using the Fosgate setup and Option 4 would be a dual vented setup off the profile.These are color coded to the Win ISD graph I made up based off a 2.4 cubic foot enclosure tuned to 26hz on the ported boxes.<img src="http://i48.photobucket.com/albums/f221/Crazy_Painter/NewPhotoshopImagecopy.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Looking at this graph based on the space I have available I am leaning toward the single ported with the higher quality amp.&nbsp; I&#039;m not looking to make something super loud to wake up the neighborhood but something that I can enjoy listening to.&nbsp; I listen to all kinds of music and the frequency range is rather important to me even if it starts approaching sub-sonic.&nbsp; I am just concerned that once I get the single sub in it might not be loud enough for me.</blockquote>

[QUOTE="KniteWulfe, post: 1807326, member: 568399"] I am currently up in the air over a couple different setups and was wondering what everyone's input would be on these. I am set on using 12' Kicker Comp 05CVR122 2 ohm 400W RMS speakers but the rest can be changed. So far I have only purchased one of those speakers. I have pretty much figured out what fits in my budget and these are my options. I am planning this in a 2.4 cubic foot custom enclosure for 3rd gen f-bodies. [COLOR=Lime]Option 1[/COLOR]: single 05CVR122 in a [B]ported[/B] box wired for 4 ohms powered off a Rockford Fosgate Punch P4002 bridged to 400w @ 4ohms RMS, perfectly matching power for the single speaker. [COLOR=Yellow]Option 2[/COLOR]: dual 05CVR122s at 2ohms in a [B]sealed[/B] box powered by a Profile AP2000 putting out 480W per channel at 2 ohms. [COLOR=DarkOrange]Option 3[/COLOR] would be single sealed 05CVR122 using the Fosgate setup and [COLOR=Magenta]Option 4[/COLOR] would be a dual vented setup off the profile. These are color coded to the Win ISD graph I made up based off a 2.4 cubic foot enclosure tuned to 26hz on the ported boxes. [IMG]http://i48.photobucket.com/albums/f221/Crazy_Painter/NewPhotoshopImagecopy.jpg[/IMG] Looking at this graph based on the space I have available I am leaning toward the single ported with the higher quality amp. I'm not looking to make something super loud to wake up the neighborhood but something that I can enjoy listening to. I listen to all kinds of music and the frequency range is rather important to me even if it starts approaching sub-sonic. I am just concerned that once I get the single sub in it might not be loud enough for me. [/QUOTE]

Verification