Reply to thread

Message

<blockquote data-quote="Scorpion" data-source="post: 370321" data-attributes="member: 552125">These are the components I have right now:Optima Blue CapAmps: Jensen 600w 4ch&nbsp; Profile CL800 2chSpeakers: RMB4 (High)&nbsp; RMB6 (Mid)&nbsp;&nbsp; Comp VR 10&quot; (Sub)Head: Pioneer MP3Eq: Legacy 12 Band PassiveMy idea:1. Fiberglass kickpanels for the RMB6&#039;s.2. Fiberglass sub enclosure for Comp VR&#039;s.3. Construct new arm rest to house the Jensen amp. With ventalation.4. Mount Profile the roof of pickup and fiberglass a new headliner around the amp.&nbsp; Provide ventaltion for amp.5. Dynamat the entire cab.6. Mount RMB4&#039;s into the stock area of dash.I have a friend that put his amp on the roof of his S-10 and the thing looked awsome.&nbsp; So I am going to steal that idea!!!! LOLOLSince it is a regular cab, I have to fabricate a really small box.&nbsp; The Comp VR&#039;s have a RMS of 300w and the Profile has a RMS of 300w@2 ohm, so I think this is a good match.&nbsp; The box will totally made of fiberglass and MDF (very little). I know that with a totally fiberglass box I will have to brace it really good. With air space restricted to approximately .5 cuft, per sub, I will have to use polyfill to increase it.Well that is all for now. When I start construction I will post pics for yall.&nbsp; If you have any advise or recommendations email me at <a href="http://mailto:" target="_blank">stach25@hotmail.com</a>.Later All</blockquote>

[QUOTE="Scorpion, post: 370321, member: 552125"] These are the components I have right now: Optima Blue Cap Amps: Jensen 600w 4ch Profile CL800 2ch Speakers: RMB4 (High) RMB6 (Mid) Comp VR 10" (Sub) Head: Pioneer MP3 Eq: Legacy 12 Band Passive My idea: 1. Fiberglass kickpanels for the RMB6's. 2. Fiberglass sub enclosure for Comp VR's. 3. Construct new arm rest to house the Jensen amp. With ventalation. 4. Mount Profile the roof of pickup and fiberglass a new headliner around the amp. Provide ventaltion for amp. 5. Dynamat the entire cab. 6. Mount RMB4's into the stock area of dash. I have a friend that put his amp on the roof of his S-10 and the thing looked awsome. So I am going to steal that idea!!!! LOLOL Since it is a regular cab, I have to fabricate a really small box. The Comp VR's have a RMS of 300w and the Profile has a RMS of 300w@2 ohm, so I think this is a good match. The box will totally made of fiberglass and MDF (very little). I know that with a totally fiberglass box I will have to brace it really good. With air space restricted to approximately .5 cuft, per sub, I will have to use polyfill to increase it. Well that is all for now. When I start construction I will post pics for yall. If you have any advise or recommendations email me at [URL="mailto:"]stach25@hotmail.com[/URL]. Later All [/QUOTE]

Verification