Reply to thread

Message: <blockquote data-quote="n2audio" data-source="post: 3466173" data-attributes="member: 540940">Ok, so 2 ch are already occupied?To run your dvc 4 with the other 2 channels you're either going to have to wire the coils parallel for 2 ohms which will have the amp running at lower than specified stable impedance and could lead to overheating problems, or wire them in series for 8 ohms.If you do the latter 8 ga would work, but 4 would still be the betterway to go.</blockquote>

Top