Reply to thread

Message

<blockquote data-quote="n2audio" data-source="post: 65223" data-attributes="member: 540940">since no one else has mentioned any equipment possibilities I guess I&#039;ll take a shot...Amps -- for some reason the &#039;01 optidrives are going dirt cheap on ebay.&nbsp; You simply CANNOT do better as far as quality vs. price.Sub amp - sl800 (500 rms @ 2 ohms, 800 rms @ 1)Fronts amp - 100.2, 200.2, or sl150&nbsp; (sl150 is probably the most powerful, but the 200.2 isn&#039;t far behind and is slightly superior in quality, the 100.2 is excellent qualtiy but not as powerful)Fronts -- Infinity 605cs They regularly go for about $130 shippedSubs -- I don&#039;t know, shivas are about as good as you can do, but you said no to those.&nbsp;&nbsp; You might check out <a href="http://www.edesignaudio.com" target="_blank">http://www.edesignaudio.com</a> for a pair of e10k&#039;s.&nbsp; Around 200 for the pair and only need like .7 cu ft per sub (sealed)&nbsp; The sl800 would run them perfectly at 1 ohm.&nbsp; Or if you want to be completely mainstream you could do some jlw0&#039;s or kicker comp vr&#039;sSo if...sl800 - 170200.2 - 170605 cs - 130Subs - 200That&#039;s 670.&nbsp; I guess if you went with the 100.2&nbsp; that would leave you about 80 for wiring and enclosure.Anyway, I hope this is of some help to you, I just spent 10 minutes writing it.&nbsp; (i&#039;m bored)</blockquote>

[QUOTE="n2audio, post: 65223, member: 540940"] since no one else has mentioned any equipment possibilities I guess I'll take a shot... Amps -- for some reason the '01 optidrives are going dirt cheap on ebay. You simply CANNOT do better as far as quality vs. price. Sub amp - sl800 (500 rms @ 2 ohms, 800 rms @ 1) Fronts amp - 100.2, 200.2, or sl150 (sl150 is probably the most powerful, but the 200.2 isn't far behind and is slightly superior in quality, the 100.2 is excellent qualtiy but not as powerful) Fronts -- Infinity 605cs They regularly go for about $130 shipped Subs -- I don't know, shivas are about as good as you can do, but you said no to those. You might check out [URL="http://www.edesignaudio.com"]http://www.edesignaudio.com[/URL] for a pair of e10k's. Around 200 for the pair and only need like .7 cu ft per sub (sealed) The sl800 would run them perfectly at 1 ohm. Or if you want to be completely mainstream you could do some jlw0's or kicker comp vr's So if... sl800 - 170 200.2 - 170 605 cs - 130 Subs - 200 That's 670. I guess if you went with the 100.2 that would leave you about 80 for wiring and enclosure. Anyway, I hope this is of some help to you, I just spent 10 minutes writing it. (i'm bored) [/QUOTE]

Verification