Reply to thread

Message

<blockquote data-quote="sl600" data-source="post: 1433920" data-attributes="member: 565669">Twistid,here in the gulf life is easy and relaxed,you can get away with few things,AndonD454, the nakamichi amps are monoblock amp which is rated as follow400x1@4 , 800x2@2 , 1000x1@1 (each amp) and in brigding two you get800x1@8 , 1600x1@4 , 2000x1@2 , and the min ohm load for the amps are 1ohm,&nbsp; in brigding two amps you run one as master and the second as slave ( master slave switch on the amps) with an 8 ga wire connecting the amps thru the - ch ,,,it is simple and easy setup. the sub has 2x4ohm v/c, connected in parallal for 2ohm.also , recomended ported box vol for the sub by the factory is 2ft^3 with 4&quot;x8&quot; port, the reason iam running 9&quot; long is bcs iam using precision port&nbsp; flared and the say to add 1&quot; to required length.the sealed vol is 1.5ft^3, iam thinking of trying the sub in a seald box.KnOkIn It 420, the box is made out of 1&quot; mdf glued and sealed with the dim of12dx16hx21.5w( alittle over the rec size ) which it comes to 2.38 ft^3 with a port tunning to 36hz, the factory did not mention if the 2ft^3 includes the drivers and the port vol or not,,,hope this helps more, and thanks again to all</blockquote>

[QUOTE="sl600, post: 1433920, member: 565669"] Twistid,here in the gulf life is easy and relaxed,you can get away with few things, AndonD454, the nakamichi amps are monoblock amp which is rated as follow 400x1@4 , 800x2@2 , 1000x1@1 (each amp) and in brigding two you get 800x1@8 , 1600x1@4 , 2000x1@2 , and the min ohm load for the amps are 1ohm, in brigding two amps you run one as master and the second as slave ( master slave switch on the amps) with an 8 ga wire connecting the amps thru the - ch ,,,it is simple and easy setup. the sub has 2x4ohm v/c, connected in parallal for 2ohm.also , recomended ported box vol for the sub by the factory is 2ft^3 with 4"x8" port, the reason iam running 9" long is bcs iam using precision port flared and the say to add 1" to required length. the sealed vol is 1.5ft^3, iam thinking of trying the sub in a seald box. KnOkIn It 420, the box is made out of 1" mdf glued and sealed with the dim of 12dx16hx21.5w( alittle over the rec size ) which it comes to 2.38 ft^3 with a port tunning to 36hz, the factory did not mention if the 2ft^3 includes the drivers and the port vol or not,,, hope this helps more, and thanks again to all [/QUOTE]

Verification