Reply to thread

Message: <blockquote data-quote="brian84corvette" data-source="post: 8307382" data-attributes="member: 586635"><p>well i was going to add that the math seems small.   .75 for sealed to me would be 3x for ported side once you take away displacment from sub and port...   so maby id be trying to design that with 2.25 on the ported side....   otherwise i dont see the advantage of using 4th order unless you want to take gain from the box...    cause at 2:1 ratio a ported box is just as loud as a 4th and alot less complicated to do.</p></blockquote><p></p>

Top