Reply to thread

Message

<blockquote data-quote="audiobaun" data-source="post: 7670912" data-attributes="member: 634282"><p>I appreciate the info that Im recieving upon the matter at hand.Its important to me to get this right this time, and be able to exchange my amps later on to my original set up that I had for 4yrs,with the same subs(4) on 2 sets of Autotek BTS 7150 @2ohms, and the BTS 7204-4ch,and a BTS 7050.Ive had this same set up before in this truck, but with different amps,and I have been working on it as i recovered it (Jacked up)stolen/taken subs, and amps last yr,and putting it back into place as I had it , but with different amps, and using new speakers,and hu,that I have, and got drownded almost by the subs.Thought that running @2ohms will be best this time on the subs(not 1ohm)and running @2ohms (not 4ohms) all together this time,was looking for the correct way to achieve the 2ohms from the amp with the set up i have, and leaving the tweet where it is,or adding another set with power,or both on a 2ch amp.That bass is going to be pretty loud,i know for sure, is why I added the tweets the last time,but came off the xover of the original 3way components,and was looking to see if the tweet added before the xover box would get me that 2ohms.I will look int the biamp situation,that would solve my problem,and achieve what I really want.</p></blockquote><p></p>

[QUOTE="audiobaun, post: 7670912, member: 634282"] I appreciate the info that Im recieving upon the matter at hand.Its important to me to get this right this time, and be able to exchange my amps later on to my original set up that I had for 4yrs,with the same subs(4) on 2 sets of Autotek BTS 7150 @2ohms, and the BTS 7204-4ch,and a BTS 7050.Ive had this same set up before in this truck, but with different amps,and I have been working on it as i recovered it (Jacked up)stolen/taken subs, and amps last yr,and putting it back into place as I had it , but with different amps, and using new speakers,and hu,that I have, and got drownded almost by the subs.Thought that running @2ohms will be best this time on the subs(not 1ohm)and running @2ohms (not 4ohms) all together this time,was looking for the correct way to achieve the 2ohms from the amp with the set up i have, and leaving the tweet where it is,or adding another set with power,or both on a 2ch amp.That bass is going to be pretty loud,i know for sure, is why I added the tweets the last time,but came off the xover of the original 3way components,and was looking to see if the tweet added before the xover box would get me that 2ohms.I will look int the biamp situation,that would solve my problem,and achieve what I really want. [/QUOTE]

Verification