Reply to thread

Message: <blockquote data-quote="audiobaun" data-source="post: 7670827" data-attributes="member: 634282"><p>Im wanting to bring my 2ch amp from 4ohms to 2ohms/stereo,and Id like to add my tweet in the pillars/in which it is all set up that way to begin with.At this time, I have the xtra 4ohm tweeter in the pillars,and the component 3ways are in the doors(tweet in the door/6.5/and 4in sub,and is a 4ohm component set.The extra tweet is a 4ohm,and is ran off of the tweeter section of the xover box along with the door tweet.Is this at a 2ohm load already off of the xover box,or do I need to supply the extra tweet off of the amp power rather than off of the xover box to get 2ohms?I thought that that an 8ohm and a 4ohm would be around 2 1/2 ohms.We can forget that mid(8ohm) just doint the extra tweet(4ohm) along with the 3way components 4ohm.Thanks</p></blockquote><p></p>

Top