Reply to thread

Message

<blockquote data-quote="audiobaun" data-source="post: 7670784" data-attributes="member: 634282"><p>I have them in there already.I left the existing 4x6 where they are, and have made a speaker box out of 3/4mdf contoured to the ridge of the roof, and back glass facing forward, but those have and dont see much power,50rms @most is what I have ever had on them,but changing out my speakers throughout the entire truck this time,and removed the rear seat for building a sub box for each 1000rms 10@1.6-1.8cuft ported in seperate chambers, with an amp on each set of subs,I have matted the rear so far, and doing the doors this week for the components,and just changing out the rear speakers.I have done the Big 3/5 with 0ga.and have 2red tops, and adding an additional 600 Kinetic for the supply and a new Ho alt around 225amp this time.It should sound pretty decent, and not going to give the subs but maybe 1/2 power on them,using 2 VIII Cyclops@2ohms this time,I for each set of subs.I think that will be plenty for me this time around</p></blockquote><p></p>

[QUOTE="audiobaun, post: 7670784, member: 634282"] I have them in there already.I left the existing 4x6 where they are, and have made a speaker box out of 3/4mdf contoured to the ridge of the roof, and back glass facing forward, but those have and dont see much power,50rms @most is what I have ever had on them,but changing out my speakers throughout the entire truck this time,and removed the rear seat for building a sub box for each 1000rms 10@1.6-1.8cuft ported in seperate chambers, with an amp on each set of subs,I have matted the rear so far, and doing the doors this week for the components,and just changing out the rear speakers.I have done the Big 3/5 with 0ga.and have 2red tops, and adding an additional 600 Kinetic for the supply and a new Ho alt around 225amp this time.It should sound pretty decent, and not going to give the subs but maybe 1/2 power on them,using 2 VIII Cyclops@2ohms this time,I for each set of subs.I think that will be plenty for me this time around [/QUOTE]

Verification