Reply to thread

Message

<blockquote data-quote="The_Dealer" data-source="post: 8531667" data-attributes="member: 661313">What part of GA are you from? Not sure what kind of power you&#039;re going to run, but personally I&#039;d drop it down to 2.8cuft net. Unless your running 500w or less, 3.84cuft net is way too big. Try to keep it between 0.72-0.78 @ 32hz and your vent velocity around 26-27 m/s on however much power you&#039;re going to run. I&#039;ll do a design for you and post it up here In a few.Edit: I also wouldn&#039;t do a labyrinth port side firing like that. You want as much length that you can get of straight port before the first port bend, having the opening right at the bend is going to kill the efficiency of the box. The one on inside the box isn&#039;t as important, but a bend at the port opening like that will make Hella noise...ask me how I know.<img src="http://uploads.tapatalk-cdn.com/20161117/b38a57d587c3a6b0e29b85f5f5d2c6e8.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Sent from my SM-G920T using Tapatalk</blockquote>

[QUOTE="The_Dealer, post: 8531667, member: 661313"] What part of GA are you from? Not sure what kind of power you're going to run, but personally I'd drop it down to 2.8cuft net. Unless your running 500w or less, 3.84cuft net is way too big. Try to keep it between 0.72-0.78 @ 32hz and your vent velocity around 26-27 m/s on however much power you're going to run. I'll do a design for you and post it up here In a few. Edit: I also wouldn't do a labyrinth port side firing like that. You want as much length that you can get of straight port before the first port bend, having the opening right at the bend is going to kill the efficiency of the box. The one on inside the box isn't as important, but a bend at the port opening like that will make Hella noise...ask me how I know. [IMG]http://uploads.tapatalk-cdn.com/20161117/b38a57d587c3a6b0e29b85f5f5d2c6e8.jpg[/IMG] Sent from my SM-G920T using Tapatalk [/QUOTE]

Verification