Reply to thread

Message: <blockquote data-quote="pro-rabbit" data-source="post: 7262384" data-attributes="member: 551878"><p>That "can" work, but unless he has the power it won't work out to well. The port is also on the small side for the SAs. Lets say each sub is .1 so that is .4 all together in a common enclosure. So your down to 3.06. The smallest port I would do would be 13.5 x 3 which is 40.5in^2 port area(ideally I would do more port area). Tunning around 33hz so that would be around 22" long(not exact I'm on my phone) but that is .67ft^3 of displacements which puts you around 2.39(ish) or .59ft^3. I would say its to small for this application. Also you have to take off for bracing and 45s.</p></blockquote><p></p>

Top