Reply to thread

Message: <blockquote data-quote="squeak9798" data-source="post: 3247065" data-attributes="member: 555320">The answer is; It depends on what exactly you are referring to.There is no problem having a 2ohm midbass and 4ohm midrange and tweeter on the same passive crossover as long as the crossover was designed to operate properly with those impedances.If the crossover was design for a 4ohm midbass, and you wired a 2ohm midbass to the crossover then the crossover point would be decreased an octave; i.e. if it was designed for a 4ohm midbass driver with a crossover point of 250hz then connecting a 2ohm midbass driver would drop the xover point to 125hz.....aswell as some other funky things occuring with the response depending on the specific design of the crossover.As to the impedance; The amplifier would see a 4ohm load for frequencies within the midrange and tweeter passbands and a 2ohm load within the midbass passband.</blockquote>

Top