Reply to thread

Message

<blockquote data-quote="slater" data-source="post: 8886918" data-attributes="member: 691295">So the underseat storage area where the box is sitting-in....Have a consistent rattle when bass hits on a rap song...I lift the box just a bit &amp; rattle gone, box is wrapped in carpet so can&#039;t be the box resting on the plastic contributing to the buzz / rattle...Its a plastic underseat liner, &amp; there&#039;s a separate outer perimeter trim piece...Going to have to quickly pull the box out &amp; give the liner &amp; trim piece a good deadening..Just curious what some thoughts are to better approach?Since its 2 similar plastic materials touching &amp; overlapping one another.Best to use the hybrid closed cell foam stuff similar to sound skins?or just use the 80mil amazon basics butyl / foil deadener &amp; the weight / mass addition will resolve my issue..Yes, overthinking as usual, just want to go in once..</blockquote>

[QUOTE="slater, post: 8886918, member: 691295"] So the underseat storage area where the box is sitting-in.... Have a consistent rattle when bass hits on a rap song... I lift the box just a bit & rattle gone, box is wrapped in carpet so can't be the box resting on the plastic contributing to the buzz / rattle... Its a plastic underseat liner, & there's a separate outer perimeter trim piece... Going to have to quickly pull the box out & give the liner & trim piece a good deadening.. Just curious what some thoughts are to better approach? Since its 2 similar plastic materials touching & overlapping one another. Best to use the hybrid closed cell foam stuff similar to sound skins? or just use the 80mil amazon basics butyl / foil deadener & the weight / mass addition will resolve my issue.. Yes, overthinking as usual, just want to go in once.. [/QUOTE]

Verification