Reply to thread

Message

<blockquote data-quote="jeremy.vaughn" data-source="post: 5725221" data-attributes="member: 605369">Subwoofer SpecificationsSubwoofer Size 12&quot;Voice Coil(s) Dual (2 voice coils)Impedance (per voice coil) 4 ohmsPeak Power Handling 1000 wattsRMS Power Handling 500 wattsWoofer Surround Poly-FoamWoofer Composition Kevlar Reinforced Semi-Pressed PaperSealed Box Volume 0.75 - 1.25 cubic feetPorted Box Volume 1.79 cubic feetSensitivity 85 dBFrequency Response 27 - 250 HzXmax (millimeters) 13.4 mmTop Mount Depth 6.75&quot;Cutout Diameter 12.75&quot;amp....1200W Max, 2/1 Channel Car AmplifierRMS Power Rating:4 ohms: 200 watts x 2 chan.4 ohm: 500 watts x 1 chan.Max power output: 1200 watts x 1 chan.MOSFET power supplyTuned Bass EQ (0-10 dB)Tri-way capable (Tri-Way crossover required)2/1 channel operationSpeaker-level inputs with signal sensing for automatic turn-on)Preamp RCA outputsHeavy duty aluminum alloy heatsinkRCA level inputsscrew terminalsVariable low-pass filter (50-300 Hz, 12 dB/octave)CEA-2006 compliant amplifierFrequency response: 20-20,000 Hzrunning a 4 ohm load... but it is double bridgedalso the highs going off and staying off.. problem is still here, it did it again this morningalso what is a really good amp for these subwoofers</blockquote>

[QUOTE="jeremy.vaughn, post: 5725221, member: 605369"] Subwoofer Specifications Subwoofer Size 12" Voice Coil(s) Dual (2 voice coils) Impedance (per voice coil) 4 ohms Peak Power Handling 1000 watts RMS Power Handling 500 watts Woofer Surround Poly-Foam Woofer Composition Kevlar Reinforced Semi-Pressed Paper Sealed Box Volume 0.75 - 1.25 cubic feet Ported Box Volume 1.79 cubic feet Sensitivity 85 dB Frequency Response 27 - 250 Hz Xmax (millimeters) 13.4 mm Top Mount Depth 6.75" Cutout Diameter 12.75" amp.... 1200W Max, 2/1 Channel Car Amplifier RMS Power Rating: 4 ohms: 200 watts x 2 chan. 4 ohm: 500 watts x 1 chan. Max power output: 1200 watts x 1 chan. MOSFET power supply Tuned Bass EQ (0-10 dB) Tri-way capable (Tri-Way crossover required) 2/1 channel operation Speaker-level inputs with signal sensing for automatic turn-on) Preamp RCA outputs Heavy duty aluminum alloy heatsink RCA level inputs screw terminals Variable low-pass filter (50-300 Hz, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20,000 Hz running a 4 ohm load... but it is double bridged also the highs going off and staying off.. problem is still here, it did it again this morning also what is a really good amp for these subwoofers [/QUOTE]

Verification