Reply to thread

Message

<blockquote data-quote="mat3833" data-source="post: 8787144" data-attributes="member: 587645">So small update. Lost foam fiberglass pods are probably not happening. Shaping the foam and making things fit how I want them too is proving to be way more time and skill than I have available right now. I'm about to start work on a new spacer for the doors that will fit the Anarchys and moving onto the pillars for the midrange and tweeters. Audison amp arrived Monday. This thing is ******* TINY. It's smaller than a sheet of paper and only about 2&quot; thick. I got the software installed on my laptop and did a little bit of messing with it, setting the amp outputs and crossovers. With it being Easter weekend I don't think I'll have time to work on the amp rack, but who knows. Protection caps are on the way for the midrange and tweeters, should be here Friday so I can get everything wired into the plugs for the amp. Ive got measurements for the box size, so I've got some modeling to do to figure out what route I'm going for the enclosure on these 18's. For the time being, it looks like one will be ran in the baffle I already have, or I may make a new baffle to fit them both in the trunk opening. Oil pan, downpipe gasket, subframe bushings, and brake pads are all here, got new tires on the car Sunday as well. As soon as the maintenance is done and the leaky oil pan is fixed the car will be back on the road and I'll have some more time to fiddle with things at work so progress should speed up a tad. Matt</blockquote>

[QUOTE="mat3833, post: 8787144, member: 587645"] So small update. Lost foam fiberglass pods are probably not happening. Shaping the foam and making things fit how I want them too is proving to be way more time and skill than I have available right now. I'm about to start work on a new spacer for the doors that will fit the Anarchys and moving onto the pillars for the midrange and tweeters. Audison amp arrived Monday. This thing is ******* TINY. It's smaller than a sheet of paper and only about 2" thick. I got the software installed on my laptop and did a little bit of messing with it, setting the amp outputs and crossovers. With it being Easter weekend I don't think I'll have time to work on the amp rack, but who knows. Protection caps are on the way for the midrange and tweeters, should be here Friday so I can get everything wired into the plugs for the amp. Ive got measurements for the box size, so I've got some modeling to do to figure out what route I'm going for the enclosure on these 18's. For the time being, it looks like one will be ran in the baffle I already have, or I may make a new baffle to fit them both in the trunk opening. Oil pan, downpipe gasket, subframe bushings, and brake pads are all here, got new tires on the car Sunday as well. As soon as the maintenance is done and the leaky oil pan is fixed the car will be back on the road and I'll have some more time to fiddle with things at work so progress should speed up a tad. Matt [/QUOTE]

Verification