Reply to thread

Message

<blockquote data-quote="bgowdy" data-source="post: 8532354" data-attributes="member: 632121">So i went ahead with the Sundown SA 12s after thinking about it all weekend and got a pretty good&nbsp; deal and a nice box with them. However due to its dimensions its not ideal for my Kia Sportage @ 4.4 net tuned to 32hz &amp;amp; 14.79&quot;s port per cube, so i will use it as temp box until i get mine built then sale and make a few more bucks with this.I have been doing some searching but im limited because im at work and everything is blocked and i guess the search engine on this forum is down, well it is for me anyway.Trying to get a idea on the box(not design it self, im just going sub up port back). Im guessing about 4 cubes net after displacements should be good but im not sure on the amount of port per i would need and im going to tune around 32-35 hz.Power wise: Soundstream Ta3k @ 1ohm rated @ 2500 rms (may increase power, may not. i assume not right now). I will say i had it playing pretty hard a few minutes ago on break and this is much easier on my electrical at 1 ohm lol. The lowest i seen at idle was 13.2v lolSo how much port do these tend to like?</blockquote>

[QUOTE="bgowdy, post: 8532354, member: 632121"] So i went ahead with the Sundown SA 12s after thinking about it all weekend and got a pretty good deal and a nice box with them. However due to its dimensions its not ideal for my Kia Sportage @ 4.4 net tuned to 32hz & 14.79"s port per cube, so i will use it as temp box until i get mine built then sale and make a few more bucks with this. I have been doing some searching but im limited because im at work and everything is blocked and i guess the search engine on this forum is down, well it is for me anyway. Trying to get a idea on the box(not design it self, im just going sub up port back). Im guessing about 4 cubes net after displacements should be good but im not sure on the amount of port per i would need and im going to tune around 32-35 hz. Power wise: [COLOR=red]Soundstream Ta3k @ 1ohm rated @ 2500 rms (may increase power, may not. i assume not right now).[/COLOR] I will say i had it playing pretty hard a few minutes ago on break and this is much easier on my electrical at 1 ohm lol. The lowest i seen at idle was 13.2v lol So how much port do these tend to like? [/QUOTE]

Verification