Reply to thread

Message: <blockquote data-quote="Stephenpvand" data-source="post: 8688005" data-attributes="member: 678365">Its aThe power cable is less than 15 ft long but is cca. and with both of those amps the amperage would be about 75-80 at max power but my rxa-f1 is only running at about half power so im guessing its total draw with the skar amp would be about 60amps on the 4 gauge wire. So would that be ok or just upgrade to a 0gauge to a distribution block and then 4 gauge to both amps to be safe.Also whats your reason behind not liking skar? They seem decent I only hear good things about them and the price is perfect for my price range. 600 watt rms 10 in and amp for around $200-250 Also not to sure on the difference of d4 or d2  only thing I really found or understood was that d4 is a little more reliable but d2 can be wired to 1 ohm for more power but less reliable?</blockquote>

Top