Reply to thread

Message

<blockquote data-quote="AJBinVA" data-source="post: 8703489" data-attributes="member: 679414">Thanks for the response. Ignorance was pretty much the reason for the subs. I did zero research beforehand. Got a group suggestion for a local car audio group and a lot of folks had Skar equipment. I saw the prices and thought dang I could have a system for almost nothing. They looked cool and were $60 each. I did no measurements before ordering and figures heck they should fit. They did but barely. After doing some research I think a <a href="https://www.parts-express.com/dayton-audio-ls10-44-10-low-profile-subwoofer-dual-4-ohm--295-251?gclid=CjwKCAjw4pT1BRBUEiwAm5QuR51zWJ0zMJtGZa3l7p8MF-NG6ITnn3yAaLJ4FlWmD1hEvmwPRMzwYhoCFygQAvD_BwE" target="_blank">dayton 10&quot; shallow mount</a> would&#039;ve been the best answer and I&#039;ll probably buy one. I feel like I have room for it under the driver&#039;s side rear and a similar box should be ok.&nbsp; Some mid range drivers will probably replace the second component set in the future. I&#039;m seeing recommendations for the Crescendo PWX-6 but finding them in 4ohm seems tough. That would probably be the best way to get the drum notes I&#039;m looking for.For now I&#039;m just hoping to get it all wired up without frying anything.&nbsp; I anticipate the stock electrical needing some vast improvements.</blockquote>

[QUOTE="AJBinVA, post: 8703489, member: 679414"] Thanks for the response. Ignorance was pretty much the reason for the subs. I did zero research beforehand. Got a group suggestion for a local car audio group and a lot of folks had Skar equipment. I saw the prices and thought dang I could have a system for almost nothing. They looked cool and were $60 each. I did no measurements before ordering and figures heck they should fit. They did but barely. After doing some research I think a [URL='https://www.parts-express.com/dayton-audio-ls10-44-10-low-profile-subwoofer-dual-4-ohm--295-251?gclid=CjwKCAjw4pT1BRBUEiwAm5QuR51zWJ0zMJtGZa3l7p8MF-NG6ITnn3yAaLJ4FlWmD1hEvmwPRMzwYhoCFygQAvD_BwE']dayton 10" shallow mount[/URL] would've been the best answer and I'll probably buy one. I feel like I have room for it under the driver's side rear and a similar box should be ok. Some mid range drivers will probably replace the second component set in the future. I'm seeing recommendations for the Crescendo PWX-6 but finding them in 4ohm seems tough. That would probably be the best way to get the drum notes I'm looking for. For now I'm just hoping to get it all wired up without frying anything. I anticipate the stock electrical needing some vast improvements. [/QUOTE]

Verification